Software Download Center
Customers who have an active license for Coventor products will be granted access to our download site. Register for a download account! Please review the system requirements before installing your Coventor software.
CoventorWare™ 2010 Full Release
CoventorWare 2010.000 contains many new features and enhancements. It is recommended that you download and review the release notes and installation instructions before installing it.
 Release Notes
Installation Instructions
Windows
Click one of the download links below and save the file on your computer. Then double click on the saved file to install it. You will need at least 2.5 GB of free space in your Temp directory for a full installation of CoventorWare. See special instructions for installation on Windows XP 64.
CoventorWare 2010 for Windows (873 MB) This download includes licensing
CoventorWare 2010 Licensing Only for Windows (23 MB)
The following download is needed only if you have purchased the Saber Component Library add-on. (Note: The Saber Template Library is included with the regular CoventorWare 2010 installation.)
Saber Component Library for CoventorWare 2010 for Windows (.zip) (860 MB)
Red Hat Enterprise Linux WS 4 and Desktop 5
Click one of the download links below and save the file on your computer. Then untar the downloaded file and run the install script.
CoventorWare 2010 for Linux (1.1 GB) This download includes licensing
CoventorWare 2010 Licensing Only for Linux (40 MB)
The following download is needed only if you have purchased the Saber Component Library add-on. (Note: The Saber Template Library is included with the regular CoventorWare 2010 installation.)
Saber Component Library for Linux (.tgx) (774 MB)
Troubleshooting Downloads
If you suspect your download may have been corrupted, download the MD5 checksum digest files for Windows or Linux. To use the MD5 checksums, you must install an MD5 checksum tool on your system. A number of free MD5 checksum tools are available; do a web search for "free MD5 checksum tool". Run the MD5 checksum tool on the CoventorWare file(s) that you downloaded. If the checksum reported by the tool is not identical to the checksum in the corresponding digest file, the CoventorWare file got corrupted during the download. Try downloading it again.
MEMS+ 1.0 Full Release
This initial release of MEMS+ works in conjunction with the Cadence Virtuoso custom IC design and simulation environment. The following versions of Cadence are supported:
- Virtuoso Schematic and Layout version IC5141, IC610 - IC613, 32-bit
- Spectre and Ultrasim versions MMSIM701/MMSIM710/MMSIM621, 32-bit
This release is available only as a 32-bit application, but it runs on supported 32- and 64-bit operating systems. As noted above, this version works only with the 32-bit versions of Cadence.
Release Notes
Installation Instructions
Click one of the download links below and save the file on your computer. For Linux,untar the downloaded file and run the install script. For Windows, double click on the downloaded file.
MEMS+ 1.0 for Red Hat Enterprise Linux WS 4 and Desktop 5 (114 MB)
MEMS+ 1.0 for Windows XP Pro (142 MB)
MEMulator/SEMulator3D
Please go to SEMulator3D Download Center and download the latest version and updates for SEMulator3D. Either MEMulator or SEMulator3D can be specified during the installation process.
EM3DS 2008
Click the download link below and save the file on your computer. Then double click on the saved file to install it.
EM3DS 2008 for Windows XP (88 MB)
EM3DS 2008 brochure
| 
