DSA

Inside Process Technology

se_logo

By Mark Lapedus

Semiconductor Engineering sat down to discuss the foundry business, memory, process technology, lithography and other topics with David Fried, chief technology officer at Coventor, a supplier of predictive modeling tools. What follows are excerpts of that conversation.

SE: Chipmakers are ramping up 16nm/14nm finFETs today, with 10nm and 7nm finFETs just around the corner. What do you see happening at these advanced nodes, particularly at 7nm?

Fried: Most people are predicting evolutionary scaling from 14nm to 10nm to 7nm. It’s doubtful that we will see anything really earth-shattering in these technologies. And so, a lot of the challenges come down to patterning. We are going to see multi-patterning schemes really take hold at more levels. For example, the fins are now based on self-aligned double patterning. People will move into self-aligned quad patterning. The gates are maybe self-aligned double. Now, they will move into self-aligned quad. So, that’s going to be a big expense, because each level is going to have multiple passes and multiple cuts.

read the full article here

Tagged , , , , , , , , , , , , , , , , , , , , ,

Will directed self-assembly pattern 14nm DRAM?

By: Mattan Kamon, PhD., Distinguished Technologist, R&D, Coventor

Matt's March 2016 Blog Graphic

But first, more generally, will directed self-assembly (DSA) join Extreme Ultraviolet (EUV) Lithography and next generation multi-patterning techniques to pattern the next memory and logic technologies?  Appealing to the wisdom of crowds, the organizers of the 2015 1st International DSA symposium recently surveyed the attendees, and nearly 75% believed DSA would insert into high volume manufacturing within the next 5 years, and nearly 30% predicted insertion within the next 2 years.   What is gating insertion?  The crowd rated defectivity as the most critical issue facing DSA.  This fact adds weight to memory being the first to be patterned with DSA.  This is because, as Roel Gronheid from IMEC pointed out last month at the SPIE Advanced Lithography conference [1], memory chips can tolerate single failing cells through redundancy and so can could tolerate higher defectivity in patterning (roughly 1 defect/cm2 compared to 0.01 defect/cm2 for logic).  Defectivity rates for DSA aren’t there yet (according to public information), but are rapidly approaching [2], [3]. read more…

Tagged , , , , , , , , , , ,

7nm Lithography Choices

se_logoBy Mark Lapedus

Chipmakers are ramping up their 16nm/14nm logic processes, with 10nm expected to move into early production later this year. Barring a major breakthrough in lithography, chipmakers are using today’s 193nm immersion and multiple patterning for both 16/14nm and 10nm.

Now, chipmakers are focusing on the lithography options for 7nm. For this, they hope to use a combination of two technologies at 7nm—extreme ultraviolet (EUV) lithography, and 193nm immersion with multi-patterning.

read the full article here

Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

What’s the Next-Gen Litho Tech? Maybe All of Them

semimd_logoBy Jeff Dorsch

The annual SPIE Advanced Lithography symposium in San Jose, Calif., hasn’t offered a clear winner in the next-generation lithography race. It’s becoming clearer, however, that 193i immersion and extreme-ultraviolet lithography will co-exist in the future, while directed self-assembly, nanoimprint lithography, and maybe even electron-beam direct-write technology will fit into the picture, too.

At the same time, plasma deposition and etching processes are assuming a greater interdependence with 193i, especially when it comes to multiple patterning, such as self-aligned double patterning, self-aligned quadruple patterning, and self-aligned octuple patterning (yes, there is such a thing!).

read the full article here

Tagged , , , , , , , , , , , , , , , ,

Directed self assembly may offer similar benefits to EUV, process modeling study says

By Luke Collins, Tech Design Forum

Tech Design Forum Logo

Directed self assembly (DSA) techniques may offer similar advantages in terms of process variation control as EUV lithography, according to a study carried out using 3D behavioral process modeling techniques.

This could reduce fab cycle times, ease process integration and save costs in advanced semiconductor processes, especially for DRAMs, whose regular structures are well-suited to the use of DSA.

read the full article here

Tagged , , , , , ,

Coventor ASML IMEC: The last half nanometer

By Scotten Jones, SemiWiki
Short SemiWiki logo
On Tuesday evening December 8th at IEDM, Coventor held a panel discussion entitled the “The Last Half Nanometer”. Coventor is a leading provider of simulation software used to design processes. This is my third year attending the Coventor panel discussion at IEDM and they are always excellent with very strong panels and discussion. The panel was made up of David Fried CTO of Coventor, Alek Chen from ASML, Aaron Theon of IMEC, and Subramanian Iyer from UCLA. Subramanian acted as both a panelist and the moderator.

read the full article here

Tagged , , , , , , , , , ,