Request WhitePaper: A Benchmark Study of Complementary-Field Effect Transistor (CFET) Process Integration Options: Comparing Bulk vs. SOI vs. DSOI starting substrates

Sub-5 nm logic nodes will require an extremely high level of innovation to overcome the inherent real-estate limitations at this increased device density. One approach to increasing device density is to look at the vertical device dimension (z-direction), and stack devices on top of each other instead of conventionally side-by-side. [1] The fabrication of a Complementary-Field Effect Transistor (CFET) technology recently described in [2] suggests that it is possible to directly fabricate n-MOS transistors on top of p-MOS transistors or vice-versa. This architecture will require new metal wiring designs and Buried Power Rails (BPR) within the substrate. The design will be disruptive and will require the development of specific new processing steps such as dielectric selective deposition on metal. In this study, we have used Coventor’s SEMulator3D® platform [3] with 3 CFET reference designs/process flows to understand the design-process interaction risks in advance of any first mask tape-out and/or first wafer start. Each process flow that was compared had a specific Si starting substrate type: bulk, Silicon-On-Insulator (SOI), and Double Silicon-On-Insulator (DSOI). We compare the 3 process flows in terms of their robustness to process variation and identify the one with the lowest likelihood of processing failures.

© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.

 

To download your free white paper, please fill out the form below.



Comments are closed.