System Requirements for Coventor Products


Coventor Licensing 1.005 System Requirements

Supported Operating Systems

  • Windows 7 Professional 64-bit, Service Pack 1
  • Windows 10, 64-bit
  • Windows Server 2012, 64-bit
  • Red Hat Enterprise Linux 6 and 7, 64-bit


Hardware

  • Any Intel Pentium 4 class or newer or AMD X86-compatible CPU

 


CoventorMP 1.20x (MEMS+ 6.40x and CoventorWare 10.40x) System Requirements


Supported Operating Systems

  • Windows 7 Professional 64-bit, Service Pack 1
  • Windows 10, 64-bit
  • Red Hat Enterprise Linux 6 and 7, 64-bit


MATLAB/Simulink compatibility:

  • MATLAB/Simulink R2016b to R2018b, Windows 64-bit only


Cadence required modules and compatibility on RHEL Desktop 6 and 7:

  • Virtuoso Schematic Editor and Analog Design Environment (ADE) 6.1.6 or 6.1.7, 64-bit only
  • Spectre or SpectreRF version 16.1, 64-bit
  • APS version 16.1, 64-bit
  • Virtuoso Layout Suite 6.1.x (optional, only required for exporting MEMS+ Pcells), 64-bit


Hardware

  • Intel Core or Xeon family CPU, or comparable AMD CPU
    • minimum 2 GHz, faster is recommended
    • minimum 2 MB L2 cache, more is recommended
    • multi-core processors are recommended because they allow use of the system for other tasks while simulations are running and simulations will run faster
  • 8 GB RAM (more is desirable)
  • Page file size should be set to twice the RAM size
  • 2.5 GB of disk space for installation
  • Minimum 5 GB free disk space for operation, more is recommended
  • Graphics card or sub-system
    • Support for OpenGL Version 1.4 or higher
    • Support for DirectX 9
    • Discrete (as opposed to integrated) graphics with a minimum of 128 MB dedicated memory is recommended.
    • NVIDIA chip sets are recommended for Windows and Linux systems. ATI chip sets may be acceptable for Windows systems.
    • Up-to-date driver software

 


SEMulator3D and SEMulator3D Reader System Requirements

Note: You must use Coventor Licensing 1.005 to install the license for SEMulator3D 7.x or greater.


Supported Operating Systems, SEMulator3D 7.x or greater

  • Windows 7 Professional 64-bit, Service Pack 1
  • Windows 10, 64-bit
  • Red Hat Enterprise Linux 6 and 7, 64-bit


Supported Operating Systems, SEMulator3D Reader 7.x or greater

  • Windows 7 Professional 64-bit, Service Pack 1
  • Windows 10, 64-bit
  • Red Hat Enterprise Linux 6 and 7, 64-bit


Hardware

  • Intel Core or Xeon family CPU, or comparable AMD CPU
    • minimum 2 GHz, faster is recommended
    • minimum 6 MB Smart Cache, or AMD equivalent (more is recommended)
    • Multi-core processors are recommended because the modeling engine will build 3D models faster
  • 8 GB RAM (more is recommended)
  • A minimum of 5 GB disk drive available needed to complete the installation
  • 100 GB is recommended for saving model data
  • Graphics support for OpenGL version 2.0 or higher
  • Display set to 1024 x 768 minimum resolution, 32-bit color (the 3D Viewer will not work if the display is set to 16-bit)

Comments are closed.